Would you like to avoid expensive repairs?
Maintenance of vehicles is important to ensure correct operation, prevent accidents, to optimize their resources and to extend their useful life.
In this sense, total energy, an innovation in lubricant for all types of engines, recognize the importance of a good engine oil to avoid expensive repairs, as it plays an important role in the correct functioning of the heart of your vehicle.
The importance of using high -quality oils, which have been specially formulated to maximize the motor performance and extend its useful life, as well as the preventive maintenance of the engine.
According to the company experts, the average costs for repairing a damaged engine can be between 40,000 and 60,000 pesos depending on the type of vehicle, damage and the parts that need to be replaced.
This number shows how important it is to take preventive maintenance into account as an intelligent investment.
In addition to lubricating and reducing the wear of internal parts, motor oil can generally provide clear signals.
By using the analysis even after use, possible mechanical failures can be recognized before they become large repairs.
How do I identify errors in used oil?
We share the most important indicators that can be recognized during an oil change and that could warn of possible engine damage:
Presence of metals:
Metal particles can indicate premature wear of internal components such as storage or pistons.
Changed color and viscosity:
If the oil has an overly dark color or an unusual consistency, it can indicate overheating or pollution.
Food smell:
The presence of fuel in the oil can indicate inefficient combustion or problems with the injection system.
Foam the residues:
These can indicate leaks or refrigerant lids that affect the engine output.
The involvement of the review of the oil used in its maintenance not only enables the driver’s early detection, but also optimizes the driver’s resources and minimizes the risk of accidents due to mechanical failures.
Checking the condition of the used oil is not just a technical recommendation: it is a diagnostic tool that prevents serious failures and the lifespan of the engine.
In addition to the detection of warning signals, the use of an oil designed for driver diseases helps this damage. Offer technological lubrication solutions that optimize the engine output from the first kilometer.
If you have already noticed that your vehicle contains used oil, it is important to note that the proper removal of this type of residue should be carried out by authorized companies.
So it is best to check your car oil
To check your car oil, park the vehicle on a flat floor, you expect the engine to cool down for a few minutes, open the hood and search for the oil level rod (it usually has a yellow or red handle).
Take the bar out, clean it, put it in again and take it out again to see the oil level. If the level is low, add the oil to the recommended level according to your vehicle’s manual.
Detailed steps:
1. Park the car on a flat terrain.
This ensures precise reading of the oil level.
2. Cross the engine.
Let the engine cool down for about 10-15 minutes after switching off so that the oil can settle in the crankcase.
3. Open the bonnet.
Find the oil standstill, which is usually near the oil filling cap and is marked with a yellow or red tab.
4. Take out the pole and clean it.
Remove the bar, clean it with an absorbing rag or paper and use it again.
5. Take out the pole again.
Look at the oil level in the rod. The level must be one of the minimal and maximum indicator brands.
6. Add oil if necessary.
If the level is below the minimal brand, add oil of the type and quantity that are recommended in the manual of your car.
7. Check the color and texture of the oil.
If the oil is dark, milky or has waste, it can be time for an oil change.
The story of total energy
https://www.youtube.com/watch?v=vwjndhm4g
Source: total energy – it is a widespread company that is flammable, natural gas and electricity
