Tesla vehicles are known for their latest technology and their seamless performance. As with any other electronic device, however, there may be cases in which your Tesla does not switch on or experience malfunctions. In this comprehensive guideline for troubleshooting, we will examine the possible reasons for this problem and provide step-by-step solutions in order to put your Tesla back into operation.
Tesla will not begin: to understand the problem
If it is confronted with a Tesla that is not switched on, it is important to diagnose the problem. While there can be different causes such as internal errors, software updates or loose connections, it is crucial to identify the specific problem before continuing with the steps for troubleshooting. Let us immerse yourself in the potential reasons why your Tesla may not be operated.
Relatives: Tesla is not calculated? Here is the reason
Delayed software update
In some cases, the delay software can lead to a temporary screen -blackout or unusual behavior in your Tesla. The system may require a restart to fix the problem and ensure smooth operation.
Internal system errors
Tesla vehicles are equipped with advanced internal systems that can occasionally absorb errors or overload. These problems can prevent the touchscreen from being switched on, while other functions such as the steering wheel and the brakes continue to work.
Loose touchscreen plugs
Another possible cause for an unreaciting touchscreen is a loosely introduced plug that connects the touchscreen with the vehicle. If this plug is replaced, the screen cannot switch on despite other components that work correctly.
Tesla does not start: Soft restarting options
Before it takes more drastic measures, it is advisable to try a soft restart to restart the software and fix smaller mistakes. Tesla offers two levels with soft food options: the touchscreen reset and the full vehicle set.
Relatives: Tesla will not connect to WiFi: steps for troubleshooting
Touchscreen reset
To replace a touchscreen, keep both SCROLR bikes pressed for up to 10 seconds on both sides of the steering wheel. This campaign will initiate a restart of the main/central screen. It is important to note that this is recommended when driving, even though this can be done while driving, is recommended to reset it if the vehicle is stationary.
Full vehicle set
If the problem remains after a touchscreen reset, a full vehicle set may be required. To carry out a complete vehicle set, go to the main screen, access the service menu and select “Switch off”. Let the system shut down completely by waiting for the screens to be switched off and the interior light runs out. After a few minutes, press the brake pedal to wake the car and initiate the restart.
Tesla will not begin: Hard restarting options
If the soft restarting options do not fix the problem, a stubborn restart may be required. However, it is essential to prepare caution, since this method includes the separation of the 12 -V battery.
Hardly reset factory
A factory -hard reset should only be tried as the last resort or under the direction of the Tesla support. This process is similar to a complete endurance and restart, but it includes the selection of the “Factory Reset” option on the screen. It is important to note that the implementation of a factory that has been reset and all personal settings and data is wiped out so that it should be used sparingly.
Tesla will not begin: additional tips for troubleshooting
Update software
If you make sure that your Tesla executes the latest software version, it is of crucial importance for optimal performance. Check regularly for software updates and install them immediately to avoid potential problems.
Check USB connections
If you have connected USB devices with your Tesla, e.g. B. a dashcam or music storage device, separate it and observe whether the problem remains. Errors or incompatible USB devices can sometimes affect the proper functioning of the vehicle systems.
Clear travel computers and previous goals
Deleting the travel computer and deleting earlier goals from the navigation system of your Tesla can help improve system stability. These actions reduce the load of the storage and may solve problems in connection with excessive data storage.
Separate Bluetooth devices
If you have connected a Bluetooth device to your Tesla, e.g. B. a phone with a large number of contacts, you temporarily separate it. Large amounts of Bluetooth devices can sometimes overwhelm the system and cause malfunctions.
Recognizing signs of an EMMC failure
In rare cases, the failure of a Tesla switching may be due to an EMMC error (embedded multimedia card). This problem primarily affects older Tesla models with the MCU1 system (Media Control Unit 1). The signs of an EMMC failure include frequent restart, the appearance of the airbag light or a continued screen. If you suspect the EMMC misery, it is important to contact the Tesla support for further support.
Tesla will not begin: conclusion
Experiencing a Tesla that is not switched on can be frustrating, but with the right steps to remedy the error, you can solve the problem and go back onto the street. Start with a gentle restart, e.g. B. a touchscreen or a complete vehicle set, and follow the additional error fixing tips. If everything else fails, contact the Tesla support to get further instructions. If you stay up to date and proactive, you can make sure that your Tesla continues to offer the extraordinary driving experience for which you are known.
